M-Series mast climbing work platform

Home Products M-Series mast climbing work platform

M-Series mast climbing work platform

The M-Series is the workhorse of Hydro Mobile’s mast climbing work platforms. It is the perfect tool for any facade work that requires high capacity, whether for new construction or restoration. With a load capacity of 20,000 lb, and a climbing rate of 3' per minute, it is perfect for masonry (brick or block), stone or marble facade work from 20' to 250' in height.

High Speed  138' length set up in 3 hours
High-Tech  0 to 210 degree angle configuration
High on Safety CE friendly
High Durability 15 years minimum life expectancy


The 7' wide decks provide ample room for workers to perform their jobs in comfort. The M-Series structure allows for angled set-ups, and there are a multitude of accessories available that allow this mast climbing work platform to adjust to different architectural configurations and constraints of the work site. All of which contribute to an estimated 30% increase in productivity, due to greater labor efficiency and reduced set-up time, not to mention a safer work environment.

Projects

St-Luke's Hospital addition

St-Luke's Hospital addition

View all projects

Testimonials

Mr. Thomas Mullahy from Eurotech Construction is writting to its distributor, Service Scaffold (South Fallsburg, NY) to let him know how pleased they are with their Hydro Mobile mast climbing work platform: I would like to express how pleased we are with the Hydro Mobile mast climbing platforms. As a general contractor, we are constantly looking to increase productivity without jeopardizing safety, and this machine was able to accord this for us.

Thomas Mullahy

Eurotech Construction
Eurotech - Project in New York

... Our selection of this supplier was not based on a specific cost justification... [...] or the usual list of technical evaluations. It was based on the degree of commitment we received from Hydro Mobile Senior Management and their engineers to our most important requirement...

Anthony M. Marra

Executive Vice President
The Steebins Engineering and Manufacturing Company

We have been using M-Series work platforms from Hydro Mobile for more than 8 years and now own over 20 M-Series units. With their 20,000 lbs capacity, the M-Series offers what we need for masons, for whom capacity is a major concern. And when potential clients get to know that you work with Hydro Mobile, they automatically see that you are more likely to perform

Dennis Knowlton

President
Knowlton & Sons Masonry Construction, Inc.

When I first saw the Hydro Mobile down in Vegas I was extremely impressed ...

Randy Miller

Foreman
Dominion Masonry

Marr and Hydro Mobile applied the engineering knowledge of their mast climber systems to solve the issues during the engineering and layout phases.

Doug Peckham

Project Executive
Dimeo Construction Company

The main reason for our initial purchase of Hydro Mobile was the safety concern we had for a project that required scaffolding up to 135 feet above the ground in a very difficult area.

Ronald E. Clough

President
Maine Masonry

Advantages that we have found using Hydro Mobile mast climbing scaffolding equipment are...

Brian D. Regner

Project Manager
Pockar group of companies

As discussed, dollar for dollar Hydro Mobile platform scaffolding is the best equipment investment we have made over the past 15 years.

Joe Anastasi

President
Old North State Masonry

After much analysis and research of the manufacturers, their various types of equipment and infrastructures, we cast our lot with Hydro Mobile platforms.

Daniel F. Marr

President
Marr companies

View all testimonials